资源类型

期刊论文 275

会议视频 2

会议信息 1

年份

2024 1

2023 14

2022 21

2021 19

2020 13

2019 20

2018 24

2017 17

2016 18

2015 11

2014 8

2013 10

2012 18

2011 12

2010 18

2009 17

2008 12

2007 13

2006 3

2005 2

展开 ︾

关键词

医院中子照射器I型堆 6

核能 4

压水堆 3

厌氧消化 3

MCNP 2

先进反应堆 2

医院中子照射器 2

发电 2

技术路线 2

燃耗 2

高温气冷堆 2

(美国) 核管理委员会 1

3D细胞容器 1

ACE格式 1

CECE-GC 1

CITATION 1

COVID-19 1

CPR1000 1

ENDF/B VII.0评价库 1

展开 ︾

检索范围：

排序： 展示方式：

Continuous biohydrogen production from diluted molasses in an anaerobic contact reactor

Sheng CHANG, Jianzheng LI, Feng LIU

《环境科学与工程前沿（英文）》 2011年 第5卷 第1期   页码 140-148 doi: 10.1007/s11783-010-0258-2

摘要： An anaerobic contact reactor (ACR) system comprising a continuous flow stirred tank reactor (CSTR) with settler to decouple the hydraulic retention time (HRT) from solids retention time (SRT) was developed for fermentative hydrogen production from diluted molasses by mixed microbial cultures. The ACR was operated at various volumetric loading rates (VLRs) of 20–44 kgCOD·m ·d with constant HRT of 6 h under mesophilic conditions of 35°C. The SRT was maintained at about 46–50 h in the system. At the initial VLR of 20 kgCOD·m ·d , the hydrogen production rate dropped from 22.6 to 1.58 L·d as the hydrogen was consumed by the hydrogentrophic methanogen. After increasing the VLR to 28 kgCOD·m ·d and discharging the sludge for 6 consecutive times, the hydrogentrophic methanogens were eliminated, and the hydrogen content reached 36.4%. As the VLR was increased to 44 kgCOD·m ·d , the hydrogen production rate and hydrogen yield increased to 42.1 L·d and 1.40 mol H ·molglucose-consumed , respectively. The results showed that a stable ethanol-type fermentation that favored hydrogen production in the reactor was thus established with the sludge loading rate (SLR) of 2.0–2.5 kgCOD·kgMLVSS ·d . It was found that the ethanol increased more than other liquid fermentation products, and the ethanol/acetic acid (mol/mol) ratio increased from 1.27 to 2.45 when the VLR increased from 28 to 44 kgCOD·m ·d , whereas the hydrogen composition decreased from 40.4% to 36.4%. The results suggested that the anaerobic contact reactor was a promising bioprocess for fermentative hydrogen production.

关键词： fermentative hydrogen production     anaerobic contact reactor (ACR)     sludge loading rate (SLR)     butyric acid-type fermentation     ethanol-type fermentation    

HTML PDF 收藏

Performance of a hybrid anaerobic-contact oxidation biofilm baffled reactor for the treatment of decentralized

Minmin LIU,Ying ZHAO,Beidou XI,Li’an HOU,Xunfeng XIA

《环境科学与工程前沿（英文）》 2014年 第8卷 第4期   页码 598-606 doi: 10.1007/s11783-013-0576-2

摘要： A novel hybrid anaerobic-contact oxidation biofilm baffled reactor (HAOBR) was developed to simultaneously remove nitrogenous and carbonaceous organic pollutants from decentralized molasses wastewater in the study. The study was based on the inoculation of anaerobic granule sludge in anaerobic compartments and the installation of combination filler in aerobic compartments. The performance of reactor system was studied regarding the hydraulic retention time (HRT), microbial characteristics and the gas water ratio (GWR). When the HRT was 24h and the GWR was 20:1, total ammonia and chemical oxygen demand (COD) of the effluent were reduced by 99% and 91.8%, respectively. The reactor performed stably for treating decentralized molasses wastewater. The good performance of the reactor can be attributed to the high resistance of COD and hydraulic shock loads. In addition, the high solid retention time of contact oxidation biofilm contributed to stable performance of the reactor.

关键词： combination filler     contact oxidation biofilm     food wastewater     anaerobic baffled reactor    

HTML PDF 收藏

Concept and application of anaerobic suspended granular sludge bed (SGSB) reactor for wastewater treatment

Mingxia ZHENG,Zhong YAN,Jiane ZUO,Kaijun WANG

《环境科学与工程前沿（英文）》 2014年 第8卷 第5期   页码 797-804 doi: 10.1007/s11783-013-0597-x

摘要： Bed expansion serves an important function in the design and operation of an upflow anaerobic reactor. An analysis of the flow pattern of expanded granular sludge bed (EGSB) reactors shows that most EGSB reactors do not behave as expanded bed reactors, as is widely perceived. Rather, these reactors behave as fluidized bed reactors based on the classic chemical reactor theory. In this paper, four bed expansion modes, divided as static bed, expanded bed, suspended bed, and fluidized bed, for bioreactors are proposed. A high-rate anaerobic suspended granular sludge bed (SGSB) reactor was then developed. The SGSB reactor is an upflow anaerobic reactor, and its expansion degree can be easily controlled within a range to maintain the suspended status of the sludge bed by controlling upflow velocity. The results of the full-scale reactor confirmed that the use of SGSB reactors is advantageous. The full-scale SGSB reactor runs stably and achieves high COD removal efficiency (about 90%) at high loading rates (average 40 kg-COD·m ·d , maximum to 52 kg-COD·m ·d ) based on the SGSB theory, and its expansion degree is between 22% and 37%.

关键词： expansion characteristic     high-rate bioreactor     anaerobic suspended granular sludge bed     expanded granular sludge bed reactor    

HTML PDF 收藏

Performance and bioparticle growth of anaerobic baffled reactor (ABR) fed with low-strength domestic

Jing FENG,Yili WANG,Xueyuan JI,Dongqin YUAN,Hui LI

《环境科学与工程前沿（英文）》 2015年 第9卷 第2期   页码 352-364 doi: 10.1007/s11783-014-0638-0

摘要： We investigated the performance of a 15.3 L capacity anaerobic baffled reactor (ABR) toward the treatment of low-strength domestic wastewater. The start-up period of the ABR was finished within approximately 130 days at a temperature below 25°C. The average COD in the effluent was 165 mg·L , and the corresponding COD removal efficiency of the ABR was 52.3%. During the third stage (from day 130 to day 233) of ABR operation, the average COD in the effluent reached 71 mg·L , which meets the secondary discharge requirement of the Integrated Wastewater Discharge Standard (GB 18918-2002, China). Moreover, partial microbial separation was observed along the five ABR compartments through scanning electron microscopic images. The geometric mean diameter of bioparticles in the five compartments increased from 0.050 mm to 0.111, 0.107, 0.104, 0.110, and 0.103 mm during the start-up stage. After operation for 179 days, the corresponding diameters further increased to 0.376, 0.225, 0.253, 0.239, and 0.288 mm, respectively. The fractal dimensions of the bioparticles indicated that these particles have smoother surfaces and more compact structures during ABR operation. Morphological analysis of the bioparticle sections demonstrated that the bioparticles have a pore volume of 30%–55%. The highest porosity was observed for the bioparticles in the second ABR compartment, whereas the lowest fractal dimension of bioparticle section was observed in the fifth compartment.

关键词： low-strength domestic wastewater     start-up     bioparticles     morphology     anaerobic baffled reactor    

HTML PDF 收藏

Impact of roxarsone on the UASB reactor performance and its degradation

Mengchuan Shui, Feng Ji, Rui Tang, Shoujun Yuan, Xinmin Zhan, Wei Wang, Zhenhu Hu

《环境科学与工程前沿（英文）》 2016年 第10卷 第6期 doi: 10.1007/s11783-016-0871-9

摘要： Impact of continuous ROX addition on performance of UASB reactor was investigated With continuous ROX addition, severe inhibition to methanogenic activity occurred ROX addition caused the changes in the morphology and bacterial diversity of AGS A possible biotransformation pathway of ROX in the UASB reactor was proposed 60%–70% of the arsenic was discharged to the effluent, and 30%–40% was precipitated Roxarsone (3-nitro-4-hydroxyphenylarsonic acid, ROX) has been widely used for decades as an organoarsenic feed additive to control intestinal parasites and improve feed efficiency in animal production. However, most of the ROX is excreted into the manure, causing arsenic contamination in wastewater. The arsenic compounds are toxic to microorganisms, but the influence of continuous ROX loading on upflow anaerobic sludge blanket (UASB) reactor is still unknown. In this study, the impact of ROX and its degradation products on the performance of the UASB reactor and the degradation and speciation of ROX in the reactor were investigated. The UASB reactor (hydraulic retention time: 1.75 d) was operated using synthetic wastewater supplemented with ROX for a period of 260 days. With continuous ROX addition at 25.0 mg?L , severe inhibition to methanogenic activity occurred after 87 days operation accompanied with an accumulation of volatile fatty acids (VFAs) and a decline in pH. The decrease of added ROX concentration to 13.2 mg?L did not mediate the inhibition. As(III), As(V), MMA(V), DMA(V), HAPA and an unknown arsenic compound were detected in the reactor, and a possible biotransformation pathway of ROX was proposed. Mass balance analysis of arsenic indicated that 60%–70% of the arsenic was discharged into the effluent, and 30%–40% was precipitated in the reactor. The results from this study suggest that we need to pay attention to the stability in the UASB reactors treating organoarsenic-contaminated manure and wastewater, and the effluent and sludge from the reactor to avoid diffusion of arsenic contamination.

关键词： Anaerobic digestion     Anaerobic granular sludge (AGS)     Arsenic species     Impact     Roxarsone (ROX)     UASB reactor    

HTML PDF 收藏

Metallic wastewater treatment by sulfate reduction using anaerobic rotating biological contactor reactor

Mothe Gopi Kiran, Kannan Pakshirajan, Gopal Das

《环境科学与工程前沿（英文）》 2018年 第12卷 第4期 doi: 10.1007/s11783-018-1073-4

摘要：

An-RBC reactor is highly suited to treat metallic wastewater.

Metal removal is due to sulfide precipitation via sulfate reduction by SRB.

Cu(II) removal was the best among the different heavy metals.

Maximum metal removal is achieved at low metal loading condition.

Metal removal matched well with the solubility product values of respective metal sulfide salts.

关键词： Factorial design analysis     sulfate reducing bacteria     multi-metal solution     heavy metal removal     anaerobic rotating biological contactor reactor     high metal loading.    

HTML PDF 收藏

Enhanced 4-chlorophenol biodegradation by integrating FeO nanoparticles into an anaerobic reactor: Long-term

《环境科学与工程前沿（英文）》 2022年 第16卷 第8期 doi: 10.1007/s11783-022-1519-6

摘要：

• 4-chlorophenol biodegradation could be enhanced in Fe2O3 coupled anaerobic system.

关键词： Dechlorination     Fe2O3 nanoparticles     Electron transfer     Microbial community    

HTML PDF 收藏

Fermentative hydrogen production from beet sugar factory wastewater treatment in a continuous stirred tank reactorusing anaerobic mixed consortia

Gefu ZHU, Chaoxiang LIU, Jianzheng LI, Nanqi REN, Lin LIU, Xu HUANG

《环境科学与工程前沿（英文）》 2013年 第7卷 第1期   页码 143-150 doi: 10.1007/s11783-012-0456-1

摘要： A low pH, ethanol-type fermentation process was evaluated for wastewater treatment and bio-hydrogen production from acidic beet sugar factory wastewater in a continuous stirred tank reactor (CSTR) with an effective volume of 9.6 L by anaerobic mixed cultures in this present study. After inoculating with aerobic activated sludge and operating at organic loading rate (OLR) of 12 kgCOD?m ·d , HRT of 8h, and temperature of 35°C for 28 days, the CSTR achieved stable ethanol-type fermentation. When OLR was further increased to 18 kgCOD?m ·d on the 53rd day, ethanol-type fermentation dominant microflora was enhanced. The liquid fermentation products, including volatile fatty acids (VFAs) and ethanol, stabilized at 1493 mg·L in the bioreactor. Effluent pH, oxidation-reduction potential (ORP), and alkalinity ranged at 4.1–4.5, -250–(-290) mV, and 230–260 mgCaCO ?L . The specific hydrogen production rate of anaerobic activated sludge was 0.1 L?gMLVSS ·d and the COD removal efficiency was 45%. The experimental results showed that the CSTR system had good operation stability and microbial activity, which led to high substrate conversion rate and hydrogen production ability.

关键词： fermentative hydrogen production     continuous stirred tank reactor (CSTR)     specific hydrogen production rate     beet sugar factory wastewater     ethanol-type fermentation    

HTML PDF 收藏

Corrigendum to: Optimization of denitrifying phosphorus removal in a predenitrification anaerobic/anoxic/post-aeration+ nitrification sequence batch reactor (pre-A

Weihua Zhao, Meixiang Wang, Jianwei Li, Yu Huang, Baikun Li, Cong Pan, Xiyao Li, Yongzhen Peng

《环境科学与工程前沿（英文）》 2020年 第14卷 第3期 doi: 10.1007/s11783-020-1233-1

HTML PDF 收藏

Performance of an ANAMMOX reactor treating wastewater generated by antibiotic and starch production processes

Hong YAO, Hao LIU, Yongmiao HE, Shujun ZHANG, Peizhe SUN, Chinghua HUANG

《环境科学与工程前沿（英文）》 2012年 第6卷 第6期   页码 875-883 doi: 10.1007/s11783-012-0459-y

摘要： A pilot-scale anaerobic ammonia oxidation (ANAMMOX) reactor was used to treat mixed wastewater resulting from a chlortetracycline and starch production process. The results, collected over the course of 272 days, show that the ratio of influent ammonium to nitrite, pH, and temperature can all affect the efficiency of nitrogen removal. The ratio of influent ammonium to nitrite was maintained at about 1:1 at a concentration below 200 mg·L for both influent ammonium and nitrite. The total nitrogen (TN) loading rate was 0.15–0.30 kgN·m ·d , pH remained at 7.8–8.5, and temperature was recorded at 33±1°C. The rate of removal of ammonia, nitrite, and TN were over 90%, 90%, and 80%, and the effluent ammonium, nitrite and TN concentrations were below 50, 30, and 100 mg·L .

关键词： anaerobic ammonia oxidation     antibiotic and starch production     ratio of ammonia to nitrite     total nitrogen    

HTML PDF 收藏

Optimization of denitrifying phosphorus removal in a pre-denitrification anaerobic/anoxic/post-aeration+ nitrification sequence batch reactor (pre-A

Weihua Zhao, Meixiang Wang, Jianwei Li, Yu Huang, Baikun Li, Cong Pan, Xiyao Li, Yongzhen Peng

《环境科学与工程前沿（英文）》 2018年 第12卷 第5期 doi: 10.1007/s11783-018-1084-1

摘要：

A novel two sludge pre-A2NSBR system was developed.

Advanced N and P removal was optimized to treat real domestic wastewater.

Nitrifiers and PAOs were enriched with 19.41% and 26.48%, respectively.

Acetate was demonstrated as the high-quality carbon source type.

关键词： Denitrifying phosphorus removal     C/N ratio     Nitrate recycling     Carbon source type     Biological nutrient removal     Pre-A2NSBR system    

HTML PDF 收藏

Thin-liquid-film evaporation at contact line

Hao WANG, Zhenai PAN, Zhao CHEN

《能源前沿（英文）》 2009年 第3卷 第2期   页码 141-151 doi: 10.1007/s11708-009-0020-2

摘要： When a liquid wets a solid wall, the extended meniscus near the contact line may be divided into three regions: a nonevaporating region, where the liquid is adsorbed on the wall; a transition region or thin-film region, where effects of long-range molecular forces (disjoining pressure) are felt; and an intrinsic meniscus region, where capillary forces dominate. The thin liquid film, with thickness from nanometers up to micrometers, covering the transition region and part of intrinsic meniscus, is gaining interest due to its high heat transfer rates. In this paper, a review was made of the researches on thin-liquid-film evaporation. The major characteristics of thin film, thin-film modeling based on continuum theory, simulations based on molecular dynamics, and thin-film profile and temperature measurements were summarized.

关键词： meniscus     thin film     contact line     disjoining pressure     evaporation    

HTML PDF 收藏

Modelling of dynamic contact length in rail grinding process

null

《机械工程前沿（英文）》 2014年 第9卷 第3期   页码 242-248 doi: 10.1007/s11465-014-0305-y

摘要：

Rails endure frequent dynamic loads from the passing trains for supporting trains and guiding wheels. The accumulated stress concentrations will cause the plastic deformation of rail towards generating corrugations, contact fatigue cracks and also other defects, resulting in more dangerous status even the derailment risks. So the rail grinding technology has been invented with rotating grinding stones pressed on the rail with defects removal. Such rail grinding works are directed by experiences rather than scientifically guidance, lacking of flexible and scientific operating methods. With grinding control unit holding the grinding stones, the rail grinding process has the characteristics not only the surface grinding but also the running railway vehicles. First of all, it’s important to analyze the contact length between the grinding stone and the rail, because the contact length is a critical parameter to measure the grinding capabilities of stones. Moreover, it’s needed to build up models of railway vehicle unit bonded with the grinding stone to represent the rail grinding car. Therefore the theoretical model for contact length is developed based on the geometrical analysis. And the calculating models are improved considering the grinding car’s dynamic behaviors during the grinding process. Eventually, results are obtained based on the models by taking both the operation parameters and the structure parameters into the calculation, which are suitable for revealing the process of rail grinding by combining the grinding mechanism and the railway vehicle systems.

关键词： rail grinding     contact length     dynamic model     Hamiltonian system     grinding stone     rail grinding car    

HTML PDF 收藏

Computation and investigation of mode characteristics in nonlinear system with tuned/mistuned contact

Houxin SHE, Chaofeng LI, Qiansheng TANG, Hui MA, Bangchun WEN

《机械工程前沿（英文）》 2020年 第15卷 第1期   页码 133-150 doi: 10.1007/s11465-019-0557-7

摘要： This study derived a novel computation algorithm for a mechanical system with multiple friction contact interfaces that is well-suited to the investigation of nonlinear mode characteristic of a coupling system. The procedure uses the incremental harmonic balance method to obtain the nonlinear parameters of the contact interface. Thereafter, the computed nonlinear parameters are applied to rebuild the matrices of the coupling system, which can be easily solved to calculate the nonlinear mode characteristics by standard iterative solvers. Lastly, the derived method is applied to a cycle symmetry system, which represents a shaft–disk–blade system subjected to dry friction. Moreover, this study analyzed the effects of the tuned and mistuned contact features on the nonlinear mode characteristics. Numerical results prove that the proposed method is particularly suitable for the study of nonlinear characteristics in such nonlinear systems.

关键词： coupling vibration     nonlinear mode     original algorithm     contact interface    

HTML PDF 收藏

Transient analysis of thermoelastic contact problem of disk brakes

Ali BELHOCINE, Mostefa BOUCHETARA

《机械工程前沿（英文）》 2013年 第8卷 第2期   页码 150-159 doi: 10.1007/s11465-013-0266-6

摘要：

The main purpose of this study is to analyze the thermomechanical behavior of the dry contact between the brake disk and pads during the braking phase. The simulation strategy is based on computer code ANSYS11. The modeling of transient temperature in the disk is actually used to identify the factor of geometric design of the disk to install the ventilation system in vehicles. The thermal-structural analysis is then used with coupling to determine the deformation established and the Von Mises stresses in the disk, the contact pressure distribution in pads. The results are satisfactory compared to those found in the literature.

关键词： brake disks     heat flux     heat-transfer coefficient     Von Mises stress     contact pressure    

HTML PDF 收藏

标题 作者 时间 类型 操作

Continuous biohydrogen production from diluted molasses in an anaerobic contact reactor

Sheng CHANG, Jianzheng LI, Feng LIU

期刊论文

Performance of a hybrid anaerobic-contact oxidation biofilm baffled reactor for the treatment of decentralized

Minmin LIU,Ying ZHAO,Beidou XI,Li’an HOU,Xunfeng XIA

期刊论文

Concept and application of anaerobic suspended granular sludge bed (SGSB) reactor for wastewater treatment

Mingxia ZHENG,Zhong YAN,Jiane ZUO,Kaijun WANG

期刊论文

Performance and bioparticle growth of anaerobic baffled reactor (ABR) fed with low-strength domestic

Jing FENG,Yili WANG,Xueyuan JI,Dongqin YUAN,Hui LI

期刊论文

Impact of roxarsone on the UASB reactor performance and its degradation

Mengchuan Shui, Feng Ji, Rui Tang, Shoujun Yuan, Xinmin Zhan, Wei Wang, Zhenhu Hu

期刊论文

Metallic wastewater treatment by sulfate reduction using anaerobic rotating biological contactor reactor

Mothe Gopi Kiran, Kannan Pakshirajan, Gopal Das

期刊论文

Enhanced 4-chlorophenol biodegradation by integrating FeO nanoparticles into an anaerobic reactor: Long-term

期刊论文

Fermentative hydrogen production from beet sugar factory wastewater treatment in a continuous stirred tank reactorusing anaerobic mixed consortia

Gefu ZHU, Chaoxiang LIU, Jianzheng LI, Nanqi REN, Lin LIU, Xu HUANG

期刊论文

Corrigendum to: Optimization of denitrifying phosphorus removal in a predenitrification anaerobic/anoxic/post-aeration+ nitrification sequence batch reactor (pre-A

Weihua Zhao, Meixiang Wang, Jianwei Li, Yu Huang, Baikun Li, Cong Pan, Xiyao Li, Yongzhen Peng

期刊论文

Performance of an ANAMMOX reactor treating wastewater generated by antibiotic and starch production processes

Hong YAO, Hao LIU, Yongmiao HE, Shujun ZHANG, Peizhe SUN, Chinghua HUANG

期刊论文

Optimization of denitrifying phosphorus removal in a pre-denitrification anaerobic/anoxic/post-aeration+ nitrification sequence batch reactor (pre-A

Weihua Zhao, Meixiang Wang, Jianwei Li, Yu Huang, Baikun Li, Cong Pan, Xiyao Li, Yongzhen Peng

期刊论文

Thin-liquid-film evaporation at contact line

Hao WANG, Zhenai PAN, Zhao CHEN

期刊论文

Modelling of dynamic contact length in rail grinding process

null

期刊论文

Computation and investigation of mode characteristics in nonlinear system with tuned/mistuned contact

Houxin SHE, Chaofeng LI, Qiansheng TANG, Hui MA, Bangchun WEN

期刊论文

Transient analysis of thermoelastic contact problem of disk brakes

Ali BELHOCINE, Mostefa BOUCHETARA

期刊论文